Radial JD7 Guitar Distro & Splitter

Studio Guitar Distribution and Splitting

The JD7™ is a guitar signal splitter that is able to drive as many as seven amplifiers at the same time without introducing noise, signal loss, or hum and buzz from ground loops.

Natural tone, quiet operation
The JD7 allows you to feed up to seven amplifiers simultaneously, with premium Jensen transformers on the outputs that ensure distortion-free signal transfer while blocking hum and buzz from ground loops. To help retain the natural tone of your instrument, Drag control load correction is also featured on the input so you won't lose the tone and feel of connecting your guitar directly to an amplifier.

Record direct and Reamp through multiple amps
The JD7 has a built-in Radial DI box, so you can take a clean guitar track directly to your recording interface while simultaneously playing through multiple amplifiers. A Reamp input allows you to send your recorded guitar track from your recording device back through any or all of your amps, so you can focus on the performance and have the freedom to tweak your amps and microphones later on.

Using the JD7 as a splitter
The JD7 is equipped with A or B inputs and 6 guitar outs on the front panel plus a tuner out on the rear. Use ch-1 with a properly grounded amp, then add as many as you like. All outputs are isolated to eliminate hum and buzz.

Using the JD7 for Reamping
Start by recording a dry track using the JD7's DI output. Then send the clean track back to the Radial JD7's rear panel XLR input. Adjust the level and you are now set to drive as many amps as you need. Move the mics, change the tone settings.

Using the JD7 with effects
A great way to quiet down noisy guitars is to run all your signals through the JD7. The high performance class-A buffers and Jensen transformer isolated outputs are truly amazing! Channels 5 and 6 are also equipped with effects loops.

Features:

• Drive up to 7 amplifiers and 2 effects loops at the same time
• Jensen transformer isolation eliminates hum and buzz
• Built-in Radial Direct box and Reamp capabilities
• Drag control load correction for natural tone
• Input A
  High impedance unbalanced ¼" input used to connect the guitar to the JD7
• A/B Selector
  Selects between input A or input B (if connected) or the Reamp input on the rear panel.
• Drag Control
  Adjusts the load on the pickup for more natural sound and feel.
• -8dB Pad
  Input level attenuator protects the JD7 against overload from high output instruments such as keyboards.
• Input B
  High impedance ¼" jack used for second guitar is equipped with priority switching jack.
• Output 1
  Primary output, used to ground the guitar to the JD7 via the first amp. Equipped with on-off switch.
• Output 2-4
  Transformer isolated outputs used to drive multiple amps. Equipped with on-off switch, ground lift to help reduce noise and 180º reverse to phase-align amps.
• Output 5-6
  Transformer isolated outputs used to drive multiple amps. Equipped with on-off switch, ground lift to help reduce noise and 180º reverse to phase-align amps.
• Power
  Used to connect the external 15V power supply that comes with the Radial JD7.
• Effects Loops
  High impedance ¼" send and receive jacks designed for guitar pedals are available on outputs 5 and 6. Loop is activated via front panel insert switches.
• Reamp XLR Input
  Takes pre-recorded balanced line level signal and converts it to a guitar level signal to drive amps and pedals. Equipped with ground lift switch to eliminate noise and input level attenuator to ensure signal is distortion free. Activated using front panel AB selector.
• Direct Box XLR
  Transformer isolated direct box output used to record a dry track. Equipped with ground lift to eliminate noise and 180ºpolarity reverse to phase-align the signal.
• Aux Out
  Rear panel unbalanced ¼" output is always on. Primarily designated to drive a tuner but may also be used to drive a 7th guitar amp.
• Warranty: Radial 3-year, transferable

Specifications:

• Audio circuit type:100% discrete class-A with transformer isolation
• Number of channels:2 Input 7 Outputs
• Frequency response:20Hz ~ 20kHz (± 1dB)
• Dynamic range:125dB (unbalanced input to unbalanced output)
• Total harmonic distortion:0.05% @ 1k (unbalanced) 0.1% @ 1k (balanced)
• Intermodulation Distortion:0.2% @ -20dBu
• Input Impedance: Variable from 10k Ohms ~ 1megaOhm
• Output Impedance:¼" unbalanced: 10k Ohms; XLR balanced: 150 Ohms
• Noise: -115dBu
• Maximum Input:+13dBu (unbalanced) +23dBu (balanced)
• Features
• Input pad, 180° polarity reverse, Ground lift, Drag Control, Effects Loop
• Input Connectors: 1/4", XLR
• Output Connectors: 1/4", XLR
• General
• Construction:14 gauge steel chassis & outer shell
• Size (L x W x D):17.5" x 6" x 1.75" (44.5cm x 15.25cm x 4.45cm)
• Weight:7.5lb (3.4 kg)
• Shipping size (L x W x D):22" x 10.375" x 4.5" (55.9cm x 26.4cm x 11.4cm)
• Shipping weight:8lb (3.63kg)
• Power:+15VDC/400mA adapter included
• Conditions:For use in dry locations only between 5°C and 40°C